System type
Real projects. Real results.
The Belmont
A mixed-wall renovation using ground floor pipe-in-screed UFH, first floor Variotherm overlay UFH and a Midea heat pump located away from the house.
ASHPUFHVariothermRenovation
MCS Certified
Quality. Safety. Trust.
RECC Member
Consumer protection you can trust
Manufacturer Training
Expertise you can rely on
Open System Design
Flexible, efficient, future ready
Support & Maintenance
Here when you need us
Project focus
Renovation and extension
Customer outcome
Comfort-led low-carbon heating
Project overview
The clients were renovating and extending a property with filled cavities, solid brick and new insulated walls.
Challenge
The heat pump could not be located directly beside the house, while the heating system had to serve mixed construction types efficiently.
AquaTherma solution
AquaTherma designed a pipe-in-screed open loop UFH system for most of the ground floor, an open loop Variotherm overlay system for the first floor and supplied a large bore pre-insulated twin-core duct to the garden heat pump position.
Outcome
The system was commissioned during a cold snap in January 2024 and maintained comfort with flow temperature not exceeding 30 degrees C.
“Tom, James and Angelo were easy to work with from start to finish, very responsive throughout, and continue to be so now the system is up and running.”
Similar to your project?
Share your property type, drawings and project stage so AquaTherma can advise the closest route.
More case studies
ASHPVariothermRenovation
Bungalow Renovation
A flood damaged bungalow renovation using Variotherm overlay UFH and a Panasonic Aquarea heat pump for quiet, steady warmth.
“The team was very knowledgeable and offered clear guidance on choosing the right setup for my needs.”
Read case study
ASHPOlder propertyRadiators
Solid Stone and Brick
An older solid stone property replacing an LPG Rayburn while retaining a one pipe radiator system commonly assumed unsuitable for heat pumps.
“Aquatherma came and took a thorough look at our existing set up and were confident they could build us a system that worked.”
Read case study
ASHPUFHNew build
New Build 3-storey Town House
A three-storey new build air source heat pump project combining underfloor heating on the ground and first floors with correctly sized radiators on the top floor.
“My family now benefit from a beautifully cosy home and we cannot thank the team enough for their hard work.”
Read case studyReady to compare your project?
AquaTherma can review the property, project stage and design constraints before recommending the right next step.